I am looking for suggestions on plumbing a sump. I have a 6ft tank which will soon have a 1" drain in the back of each end. I plan on circulating 700 to 1400 gph. The two pumps I plan to use have 1" inlets and 3/4" outlets. I found some black 1" hose in the pond maint. section at Home Depot that I am planning on using for the drains. I am looking for ideas on the return lines. I would like to spread the flow out as much as possible. At this point I am thinking of putting in two spray bars the full length between the overflow boxes top and bottom.
I am also trying to find suppliers for;
Foam filter for the pump suction pipes 1"id by 3 to 5"od by 8 to 12" long.
3/8" and 1/4" acrylic sheet for building sump or some one who has an old tank for sale that will fit a 16 X 30 foot print. Although I can modify the stand some to make room for a longer sump if need be.
Walter I still need to come by and look at you setup and those fine fish.
I am also trying to find suppliers for;
Foam filter for the pump suction pipes 1"id by 3 to 5"od by 8 to 12" long.
3/8" and 1/4" acrylic sheet for building sump or some one who has an old tank for sale that will fit a 16 X 30 foot print. Although I can modify the stand some to make room for a longer sump if need be.
Walter I still need to come by and look at you setup and those fine fish.
.  But then, I'm kinda partial to them myself.  Walter helped me find a really nice 105 gal, an exact match to my 75 gal I might add, and I got it home last weekend.  Unfortunately, I work out of town and did not get a chance to do anything with it.  This weekend I will be at the beach house and the next weekend is Easter so I guess it'll be a May baby.  I did manage to get the black ColorQuartz that I intend to use for the substrate and have already ordered the rest of the extras I need/want.  An empty tank is surely a sad site  :( .
Comment