Announcement
Collapse
No announcement yet.
Search Result
Collapse
4 results in 0.0048 seconds.
Keywords
Members
Tags
-
Horizontal Tank Divider
- Created by: ScorpiosWife
- views
- 17 comments
Horizontal Tank Divider
OK, so the entire thing took about 20 minutes to build! Of course, as I suspected, hubby wouldn't let me play with sharp objects. While he was cutting, I removed the filter, gathered some marbles for the sides & then realized I forgot to take pictures of the material before we started. Oops. I didn't remember till he had already cut the mesh, egg crate & had started with the zip ties. Hubby measured & cut the egg crate as close to the inner dimension of the tank as possible. Then he cut the ... -
Just Another DIY Egg Tumbler...
- Created by: cichlid1409
- views
- 0 comments
Just Another DIY Egg Tumbler...
Been wanting to do this for a while now but finally got around to making my first egg tumbler so i thought i would share the experience and show the inexperienced how i assembled it. very easy and only took about 15 min to assemble. i started with a clear plastic fluorescent bulb guard. can be found in the lighting section of HD or lowes. and fiberglass screen like you would use on windows or doors. First I cut a 4" section and a 1 1/2" section off of the clear plastic tube ... -
DIY BBS HATCHING
- Created by: PhishPhreek
- views
- 1 comment
DIY BBS HATCHING
This brine shrimp hatchery consists of a rack made from 1x6 pine, three bubblers and 3 empty rum bottles (1.75 liter) with the bottom cut off and the cap screwed on tight. The bottles sit on a shelf with the bottleneck inserted through a retaining hole in the shelf. Disposable bowl covers are provided as a splashguard.
Invite a friend or two over to help empty the rum bottles.
The bubblers consists of a length of rigid plastic tubing on the end... -
DIY egg tumbler
- Created by: fshfrk
- views
- 0 comments
DIY egg tumbler
It tumbles black eyed peas pretty good.
1. Cut the bottom out with a 1" lip.
2. Cut a circular piece of plastic canvas so it could be inserted inside and glued.a. About 1" into the bottle.b. Used that new gorilla super glue. It is thick and dry's rubbery.3. Rotated the bottle with the glue in it to evenly coat edge of plastic canvas. 4. Let it dry over night on it's side so the glue does not run down the bottle and keep rotating. 5. Next cut out the bottom of the bot...