Cobraden's 150 build

[Sea-agg09]

Nice build so far. What UV are you planning on using? Aquatic life fixtures are awesome. Especially with 6 T5 bulbs, you can grow any SPS you want. Are you going to use the BRS GFO, or something else?

[cobraden]

Tank is in my bedroom for now. will be making a move to the dining room once I figure out the configuration and after it's time in the garage for drilling, resealing and testing. My plan was to keep it in the bedroom but it takes up too much room and I think there may be a little water noise. I will put my 46 bowfront in the bedroom and call it good.

I'm still reading up on the carbon dosing. Not sure I can pour vodka into an aquarium. I'm not that good at sharing.

the sump was made by PM. I will modify it to do the things I want it to do now. i was using this sump on my 300.

I'm probably going to trash the old overflow box. The new ones will most likely be bent black plex with better silicone work. Toying with the idea of of making a long overflow box that houses both sets of drains and returns. not quite coast to coast but maybe covering 2/3's of the back. Just not sure I want to take up that much tank space.

[stephen]

i'm interested in finding out what you have planned for the old overflow box i have the same size tank i'm intereted in converting to a reef ready.

[myjohnson]

man, is that tank in your bedroom?

My gal would kill me!

Also, clean looking sump man. Who made it?

Are you going to be doing some form of carbon dosing?

[FrontosaurusRex]

Keep us posted.

[cobraden]

Already have the RK. The plug part just got damaged so I need to have that replaced. I like what I have read about the Apex and think that it would be a good future upgrade.

[Darbex]

Nice start. Ask Soymilk, but I wouldnt get the RK get the Apex controller.

[semper]

looking good, love the lights

[cobraden]

Well after picking up this tank a couple months ago, and grabbing equipment here and there, it looks like it's time to get this party started.
My idea is to make this a mixed tank with a heavy SPS focus.
I'm going to take my time as there is a lot to do, but I figured I might as well start documenting it.
What I have so far:
150 gallon aquarium
Oak Stand and Canopy
Sump
Warner Marine AR-150 skimmer
Korallin C1502 Calcium reactor, solenoid valve and CO2 tank
Aquatic Life 6 bulb T5 system with LED night lights and light controller
UV sterilizer
Return pump (have a few to choose from) Planning on using external.
2 Tunze PH with the 7240 drivers and multi controller. (hope I don't need)
Have lots of live rock and sand from the 300g take down.
Still need to pick up as $$ allow:
GFO reactor
New plug set for my Reefkeeper2

Tank is a 150 gallon 60"x24"x24". Bought it used and it was being used for a reef. Has some scratches on the front panel but nothing too bad. Tank is reef ready with one 1" drain and one 1" return. Holes in the tank are 1-3/4". Secondary silicone seal inside the tank is discolored and the overflow box if functional but not great looking. The tank has a huge centerbrace
The plan is to drill the tank for two 1-1/2" drains and an additional return using the new glass hole saws that I just ordered. I will also remove the current overflow box and all of the internal silicone, add the new boxes and redo the entire secondary seal. The center brace will be replaced by a metal brace that I will have made and powercoated to protect from corrosion.


The sump I have is 36"Lx18"Wx24"H. It's a little longer than I wanted to use by about 6" but I have it and can make it work. Right now it's pretty open but I plan on making it somewhat multi purpose. I will add a refugium and a couple of open stands to hold my reactors. Will also add an additional bubble trap and probe holder. The Refugium will have dimension of aprox 15"x8" and be about 16" tall and will be on the front side of the sump so I can see any critters that happen to end up living down there. This will be a very slow current area of the sump. The rest of the sump will have a pretty high flow. The extra length of the sump may force the use of an internal return pump but I'm planning on using external.
Water return to the tank will be something similar to the one discribed here http://www.wetwebmedia.com/pbh2oret.htm (sorry, don't know how to highlight a word and make it a link) I hope this system keeps me from needing the powerheads but I have them just in case.
Just started placing things in the stand last night to see how they fit.

Added the lights to the canopy and like the way they work.

LEDs only

full on!

More to follow as I make progress!