Announcement

**Darbex** · 03-06-2011, 10:36 AM

I need an ATO

**Darbex** · 03-06-2011, 10:39 AM

Tell me what LA stuff you want and we can just pay the difference to the other.

**ssrprelude** · 03-06-2011, 11:57 AM

Deal

**soymilk** · 03-07-2011, 02:05 AM

what about me? i need some stuff too

**Darbex** · 03-07-2011, 02:07 AM

Clearly you owe me Jim. What do you need Trung?

**soymilk** · 03-07-2011, 02:20 AM

DIY Kalk Reactor! Save $100 +10%

Kalk Stirrer DIY Kit

http://www.avastmarine.com/ssc/do/product/youbuilt/K1-Kalk-Stirrer-Kit

ATO

The Parrot ATO System

http://www.avastmarine.com/ssc/do/product/rigging/Top-off-Kit

The Parrot ATO system Intelligent, observant, long lived, colorful and always repetitive, the Parrot will be the companion you won't know how you lived without. Along with the fun new name comes the pedigree of a proven winner. How do you make improvements to the ATO with an unrivaled reputation for reliability? MORE sensors! Our new Parrot ATO now comes with two pressure sensors plus a backup float standard! Simple to set up and maintenance free, we think you will find the reason so many reefers rely on our systems. How it works Two ultra sensitive pressure sensors connect to tubing that sits in our magnetic bracket and is placed in your sump. As the water level falls from evaporation, this pressure change is registered by a teflon diaphragm that actuates a switch. The switch CLOSES and turns your ato pump on. As the water fills the sump from your top off reservoir, the pressure rises and the sensor OPENS the switch to turn off the pump. 3 Layers of Safety The main operating sensor sits at the lowest level in the magnetic holder. This controls the operation of the pump and is the heart of the system. The secondary sensor on the V2 sits an inch above the main sensor and acts as a redundant main sensor, if for any reason the main sensor fails to operate correctly this secondary backup performs the operating duties. Finally, a mechanical float valve is installed on the water pump return line which prevents water from overflowing in case of catastrophic failure or due to pump siphoning. Analog Advantage This is an analog system that is not reliant on printed circuit boards, complex and confusing logic control, unreliable optical sensors or finicky float switches. Our system has an amazing reputation for reliability and is hand soldered and tested right here in our Virginia facility to ensure the most stringent quality control. We also have Reef Controller specific switches that instead of turning a pump on, simply relay a signal state to your controller where you can assign commands based on this information. This hybrid digital/analog system offers some unique programming options for the advanced aquarist! Pump Choices offer unparalleled flexibility We know that not everyone has the same needs from an auto top off pump and we would never force you to buy something proprietary that doesn't meet your requirements. Many will find that a small Sicce pump connected to the system is all that is needed to reliably top off the tank, while others may require more robust peristaltic pump systems with remote water reservoirs. There is no pump included with our top off system so this allows you to make the right choice for your aquarium. Maybe you are looking to replace an unreliable top off system but you already have the pump you would like to use, if you can plug it into a 110v outlet, it can be controlled with our system! GHL Systems Have a Profilux and a GHL doser? Our system installs simply by connecting the 6 pin cable to the level 1/2 port and then you can assign any control circuit you wish to the ATO function. This can be a spare doser or an outlet on your powerbar. There is no need for splitter cables or more complex high/low programming functions, both of our sensors are connected in series so following the 1 sensor ATO setup from GHL gets you connected quickly and pain free. Neptune Systems Our Neptune specific ATO system connects directly to the I/O port of your Apex controller via 8 pin DIN cable. Once connected the system will automatically register the signal on SW1 input. You can then simply assign the top off function to any pump connected to your Apex. If you are already using a breakout box on this connection, a simple Y splitter can be used so you still have access to inputs 2-6. Customize the look Since our sensors use standard 1/4" RODI style poly tubing, you can easily swap out the tubing with any color you want to match your aesthetic. Additionally, standard RODI 1/4" fittings can be used to create truly custom installations for the discerning aquarist. Technical Data:Water level sensitivity: 1/2" Magnet strength: up to 1/2" glassMagnet bracket dimensions: Switch box dimensions: 4" x 2.25" Relay box capacity: 3 ampsSwitch rating: 10+ million cyclesWarranty: 1 year

Maybe skimmer container ( so no more risk of overflow)

Davy Jones' Skimmate Locker

http://www.avastmarine.com/ssc/do/product/proteinskimmers/Davy-Jones-Skimmate-Locker

**soymilk** · 03-08-2011, 12:47 AM

Is this going down? Wassup?

What y'all getting?

**ssrprelude** · 03-08-2011, 07:59 AM

Brian I will Paypal you the difference from the LA order.

Trung, I will put the order in Thursday. I got you bro.

**ssrprelude** · 03-08-2011, 07:59 AM

Brian I will Paypal you the difference from the LA order.

Trung, I will put the order in Thursday. I got you bro.

**ssrprelude** · 03-10-2011, 09:59 AM

Everything is ordered. I'll let yall know when the stuff comes in.

**Darbex** · 03-10-2011, 12:06 PM

Sweet

Announcement

Avast Mini Group Buy

Avast Mini Group Buy

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment