If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
So you filled with ro/di water with a TDS reading of.................280??!!??
It was better as mention before me to use tap water cause you want to crash your tank a bit and than let it cycle about 3/4 weeks before you start doing WC with ro/di. I your case I would check your ro/di system cause even with a dirty filter you TDS should be around 50 or so. My ro/di pushes out 0.0, just saying.
Other than that nice substate and the scape looks sharp too. What kind of plants you gonna use?
I posted my tap water parameter. As of now only thing I have in there is HC that I'm trouble growing atm. I am looking for hard growing plants to see how well the soil work.
Pretty stoked about this substrate, the color and form by far exceeds ADA Amazonia and if it's anything like the rest of the Brightwell line up it's gonna grow plants like magic!
So you filled with ro/di water with a TDS reading of.................280??!!??
It was better as mention before me to use tap water cause you want to crash your tank a bit and than let it cycle about 3/4 weeks before you start doing WC with ro/di. I your case I would check your ro/di system cause even with a dirty filter you TDS should be around 50 or so. My ro/di pushes out 0.0, just saying.
Other than that nice substate and the scape looks sharp too. What kind of plants you gonna use?
I took that as being a measure of his regular tap water? RO/DI wouldnt have hardness like that would it?
So you filled with ro/di water with a TDS reading of.................280??!!??
It was better as mention before me to use tap water cause you want to crash your tank a bit and than let it cycle about 3/4 weeks before you start doing WC with ro/di. I your case I would check your ro/di system cause even with a dirty filter you TDS should be around 50 or so. My ro/di pushes out 0.0, just saying.
Other than that nice substate and the scape looks sharp too. What kind of plants you gonna use?
I think he meant after the water was filled into the tank the soils release along with the Mosura products he uses brought it up to a TDS of 280.
So you filled with ro/di water with a TDS reading of.................280??!!??
It was better as mention before me to use tap water cause you want to crash your tank a bit and than let it cycle about 3/4 weeks before you start doing WC with ro/di. I your case I would check your ro/di system cause even with a dirty filter you TDS should be around 50 or so. My ro/di pushes out 0.0, just saying.
Other than that nice substate and the scape looks sharp too. What kind of plants you gonna use?
Does that stuff leach ammonia like Aquasoil? If it does, filling it with RO right off the bat would be a waste of time to me.
I had wondered the same myself. I have read that with aquasoil you have to do some insane water changes initially to offset the ammonia spikes and then start a calmer water change schedule. I have seen a few other Ph reducing soils that were a bit calmer at first, but have also read that they diminish in reducing capacity far more quickly...
First of all I just want to thank Stephen for hooking it up with a tank! After I cleaned it, it looks freaking new!
I just picked up this new soil call Brightwell Escuro which was the black substrate. They also carry the brown color which called Brightwell Cafe. The color of the Escuro is freaking amazing even made eklikewhoa say WHOA!. As of now they come in 3 different sizes extra fine(1mm), fine (3mm), and medium (5mm).
In this case I went with the fine since I'm going to use it for shrimp and the grain is just a tad bigger then ADA aquasoil powder. I'll have the close up picture of the grain later today
After the foundation was done, the biggest bag filled about 2.75 in a 24x12 footprint.
eklikewhoa push me into using the seiryu rocks which I didn't have much to choose from and this I came up with.
It only took me 5 hours to fill up this tank with RO/DI water since my tap water is bad to CRS specs.
Tap Water
PH- 7.9
TDS - 280
GH - Off the chart 20+????
KH - 16
I'll test the water again today after work to see how it's doing.
Leave a comment: