Announcement

Collapse
No announcement yet.

For Thomas: Got Glass Scratches?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • tbui1178
    replied
    lol

    Leave a comment:


  • ssrprelude
    replied
    Don't hate me cause you have small tank syndrome.

    Leave a comment:


  • myjohnson
    replied
    Don't hate me cause you small. )

    Leave a comment:


  • ssrprelude
    replied
    F you!

    Leave a comment:


  • myjohnson
    replied
    Originally posted by tbui1178 View Post
    My tank is eurobraced and is heavy as all hell.
    Get Jim to sit in your tank and do it.

    Leave a comment:


  • bicnvu
    replied
    Confirm these rules before starting..
    **Both arms has to move around freely
    **Polisher pad has to lay totally flat on the glass at all time
    **Your running on pretty high rpm so if the pad is not securely flat, your polisher will jerk and vibrate.

    Leave a comment:


  • tbui1178
    replied
    My tank is eurobraced and is heavy as all hell.

    Leave a comment:


  • bicnvu
    replied
    Maybe I can help...The information provided is based on glass, not acrylic..
    Tools:
    Variable speed polisher - Prefered up to 3500 rpm. At lower speed, it won't do much.
    Glass squeegee - any cheap one so you can wipe and inspect if scratches are visible
    Cerium Oxide - 99% purity - Cerium oxide is what industry jewelers use to polish diamond and gold to make them shiny. The more the purity the better.
    Polishing pad: Hard (hard) felt pad. If felt pad is too soft, the cerium will only soak through and won't be effective. Try leather if you can find some. Prefer 5-6 inches pad.
    Flexible backer pad - If you decide to go with 5 inch felt pad, then you need 5 inch backer board
    Spray water bottle - to hold mixed content of water and cerium oxide. Spray directly on glass or felt pad
    Furniture dolly (option) – Easier move big tank and store after done.

    Try it on: Fine scratches but if you got the will, nothing can stop that. Just remember too, if you polish deep scratches, there will be a ghosting/hue effect on your glass. So, to avoid ghosting/hue, a larger polishing area is required.


    Don’t try it on: Deep scratches that finger nail can’t run through. If you have a few deep scratches, no problem. If whole tank has deep scratches, I would hesitate to start.
    **Tanks with euro brace – absolutely no room to move arms around. If you have a few scratches, then sure
    Hope the information can be a good starting point..good luck

    Leave a comment:


  • Joe Reborn
    replied
    yo come to Dallas and buff my tank, forget the 6pack foo i will get ya a case of cold ones!

    Leave a comment:


  • myjohnson
    replied
    If you let me have it for free I'll take that mung.

    I'll buff those scratches out too!

    It's called elbow grease foo!

    Leave a comment:


  • tbui1178
    replied
    LOL! Nah..the scratches I have are too deep for that - IMO.

    Thai, if my 180g is big enough - want to use it for your massive tank you are about to roll on?
    Last edited by tbui1178; 05-11-2010, 09:06 AM.

    Leave a comment:


  • myjohnson
    replied
    Yeah but he can just tell his maid to do it!

    This foo straight ballin.

    Leave a comment:


  • ssrprelude
    replied
    True that!

    Leave a comment:


  • 76dragon
    replied
    Thomas too ballin for that much work.

    Leave a comment:


  • tbui1178
    replied
    Sounds like too much work for my lazy self. I rather buy a new tank, plus I got some stuff in the tank now that I would not want to risk that experiment on. :)

    Leave a comment:

Working...
X