Announcement

Collapse
No announcement yet.

RO/DI from homes MANABLOC

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • RO/DI from homes MANABLOC

    Hello all!!!

    Just now getting into the saltwater tanks. I've ordered my BRS RO/DI system. I was figuring where Id put my mixing station. The best location is in my garage. The only water source in there is from a MANABLOC water distributing system. There are two available spots where I could hook up my RO/DI system. I just wanted to see :

    1. Has anyone done this before?
    2. Would the pressure coming from the MANABLOC mess up the RO/DI system?
    3. Is there anything I should know before doing so?


    any input is much appreciated!

  • #2
    ok so I found out for myself, that the RO/DI I ordered came with the fitting for a water hose. Which was the same size the manabloc used. so it was pretty simple. I had also ordered the pressure gauge, which also is right where it needs to be at 60 PSI.

    Comment


    • #3
      Send photos of your setup.

      Mike

      Comment


      • #4
        IMG_0992.jpgIMG_1002.jpgIMG_1071.jpg



        Still running the lines through my walls but that's pretty much it. Just slipped the Red (in) line and that's the end result!

        Comment


        • #5
          What type and size reservoir and shut offs are you using? Thanks for the progress report.

          Mike

          Comment

          Working...
          X