Announcement

Collapse
No announcement yet.

Quieting an Overflow Box

Collapse
X
Collapse
  •  

  • Quieting an Overflow Box

    I recently became involved in aquaria when a friend of the family "gifted" us a 17 gallon aquarium. I had very limited experience with keeping fish, but figured I was smart enough to keep a larger tank. Sadly, I quickly and definitively killed all of the fish that I inherited. In the quest to figure out what I had done wrong, I found the box. Cycling 101....

    I was consumed by the www.houstonfishbox.com website. It is a never ending wealth of information that I find myself looking at several times a day. To this day, I feel like a complete amateur but I continue to read and learn.

    By profession, I am a Civil Engineer with an emphasis on hydrology and hydraulics. I am also the type of person that learns best by seeing and not by reading. I am also responsible for hosting a fair amount of training and I really enjoy teaching.

    Click image for larger version

Name:	overflowbox.jpg
Views:	2
Size:	25.4 KB
ID:	952313
    I recently decided to add a wet / dry filter to my 72 gallon tank. With a lot of the research that I did on the web, I wasn't able to get the information that I needed to assure me that I was selecting the correct components and pumps for my new endeavor. Not finding the information that I needed, I decided to conduct tests of my own in my driveway. As I was starting the test, I decided that I would take video of my experiment and then post it on the web to share with the Box. Maybe I had something worthwhile to share in the format that I (and possibly others) can learn from.

    I ran a test on the driveway and took a video. I am running an estimated 450 - 500 gph for this test. Here is the video.




    Forum conversations related to this video can be found in the following thread:

    http://www.houstonfishbox.com/vforum...ox-video-added

    During the video, I made reference to HoustonFishBox. Not wanting to step on toes, I contacted the webmaster to verify that I hadn't done so. She liked the video and suggested that I write an article.

    I hope that this video helps somebody as much as the HoustonFishBox has helped me. I have plans to make additional videos in the near future. If there are topics that you are interested in learning more about, don't hesitate to let me know.

    Thanks again HoustonFishBox for making a great hobby a much easier and more rewarding experience.

    Jarrodaden

    • cichlid1409
      #7
      cichlid1409 commented
      Editing a comment
      I would highly suggest a gate valve versus a ball valve.

    • jarrodaden
      #8
      jarrodaden commented
      Editing a comment
      A gate valve is better for making for minute adjustments, but i they make a pvc version of that I wasn't able to find it.

    • cichlid1409
      #9
      cichlid1409 commented
      Editing a comment
      they do make them . but im not sure if they carry them at HD or lowes.

      if i remember correctly I did see pvc ones at lowes but they where only in the 2" size.
    Posting comments is disabled.

Latest Articles

Collapse

  • Building a Canopy for a 125 Gallon Tank
    by Hangman
    Well, its 2 AM and I just got pretty much done with the canopy.

    Supplies:

    1 4x8 plywood (red oak)
    16 ft. large molding trim
    16 ft small molding trim
    17 ft smal angle modling trim (to make the cabinet doors)
    2 sets of hinges.

    1st: Cut the ply wood into strips to make the front and side of the cabinet:


    P9020006 by HangTheMan, on Flickr

    2nd: Make sure the edges of the strips are 45 degrees to make ...
    09-03-2012, 01:49 PM
  • Horizontal Tank Divider
    by ScorpiosWife
    OK, so the entire thing took about 20 minutes to build! Of course, as I suspected, hubby wouldn't let me play with sharp objects. While he was cutting, I removed the filter, gathered some marbles for the sides & then realized I forgot to take pictures of the material before we started. Oops. I didn't remember till he had already cut the mesh, egg crate & had started with the zip ties. Hubby measured & cut the egg crate as close to the inner dimension of the tank as possible. Then he cut the ...
    08-22-2012, 07:50 PM
  • DIY LED Build
    by cichlid1409
    So, I've been wanting to upgrade to a LED fixture on my coral tank for a while now. As I looked online at all the fixtures I found they were either too much moolah or not bright enough IMO. So I decided to pull the trigger and try to build my own. After digging around online and figuring out a game plan this is what I decided to go with: 12 - 3w cree XP-G (white) 12 - 3w cree XP-E (royal blue) 1 - meanwell 35-700 driver 1 - meanwell 60-1050 driver 60 degree lenses 10in X 10in heatsink Custom ...
    03-24-2011, 12:22 PM
  • Continual Air Removal From Siphon Tubes On Overflow Box
    by jarrodaden
    I was looking for a way to automate the air removal from the siphon tubes on my overflow box without running risk of pumping the siphon tubes empty. I was also worried about siphoning them dry during a power outage via the air tube.

    Using an aqua-lifter pump, I came up with a solution.

    Attached is a DIY video link.

    ...
    09-26-2010, 03:11 PM
  • Wet/dry Filter Outlet Anti-Siphon Hole - Shield preventing messy spitting at startup
    by jarrodaden


    I had a problem with water squirting out the anti-siphon hole on my wet/dry outlet and Dustin at Houston Aquarium Warehouse gave me this idea.

    Simple and easy to do.


    ...
    09-26-2010, 01:21 PM
  • DIY Background- Vinyl
    by Zebvance
    I had a black background on my 240 from Petsmart. I had a lot of problems with it. Water would get in between the background and the tank when I would service the tank. It got on my nerves enough for me to rip it off. I ended up having the idea of laying down one big piece of vinyl (a big black sticker) on the back instead of painting it. I am not a very good painter and I didn't want to do something that permanent to my tank. So I picked up a 96x30 sheet of vinyl from the local decal shop...
    08-28-2010, 01:25 PM
Working...
X